elixir-patterns/patterns/testing.md

# Testing Patterns in Elixir

Patterns extracted from the Elixir standard library source code — how the core team writes and organizes tests.

---

## 1. Module-Level Async Declaration

**Source:** [lib/elixir/test/elixir/gen_server_test.exs#L9](https://github.com/elixir-lang/elixir/blob/f4e1b34617ef92052b65781f18eae5b88a490098/lib/elixir/test/elixir/gen_server_test.exs#L9), [lib/elixir/test/elixir/enum_test.exs#L8](https://github.com/elixir-lang/elixir/blob/f4e1b34617ef92052b65781f18eae5b88a490098/lib/elixir/test/elixir/enum_test.exs#L8), nearly all test files

**What it does:** Every test module declares `async: true` or `async: false` at the module level, making concurrency intent explicit.

**Why:** Tests that don't mutate global state run concurrently, dramatically speeding up the suite. The explicit opt-in forces developers to think about whether their test touches shared resources.

**Pattern:**
```elixir
defmodule GenServerTest do
  use ExUnit.Case, async: true
  # ...
end

# When global state is modified (e.g. registered processes):
defmodule TaskTest do
  use ExUnit.Case  # async defaults to false
  # ...
end
```

**Key insight:** The vast majority of Elixir's own tests use `async: true`. Only tests that register global names, modify Logger config, or interact with the filesystem use synchronous mode.

### When to Use

**Triggers:**
- You're creating any new test module (always explicitly declare async intent)
- Tests are pure — no global name registration, no shared ETS tables, no filesystem writes to the same path
- You want faster test suite execution

**Example — before:**
```elixir
defmodule UserTest do
  use ExUnit.Case
  # Defaults to async: false — runs serially for no reason
  test "parses name" do
    assert parse_name("Alice Bob") == {"Alice", "Bob"}
  end
end
```

**Example — after:**
```elixir
defmodule UserTest do
  use ExUnit.Case, async: true
  # Pure tests run concurrently — suite finishes faster
  test "parses name" do
    assert parse_name("Alice Bob") == {"Alice", "Bob"}
  end
end
```

### When NOT to Use

**Don't use this when:**
- Tests register global process names (`:global`, `Process.register/2`)
- Tests modify shared application config (`Application.put_env`)
- Tests write to the same filesystem path without `@tag :tmp_dir`
- Tests depend on Logger configuration or capture stderr in exact mode

**Over-application example:**
```elixir
defmodule ConfigTest do
  use ExUnit.Case, async: true  # DANGEROUS

  test "updates global config" do
    Application.put_env(:my_app, :key, :value)
    assert Application.get_env(:my_app, :key) == :value
  end
  # Another async test might see or clobber this config!
end
```

**Better alternative:**
```elixir
defmodule ConfigTest do
  use ExUnit.Case  # async: false — global state mutation

  setup do
    original = Application.get_env(:my_app, :key)
    on_exit(fn -> Application.put_env(:my_app, :key, original) end)
  end

  test "updates global config" do
    Application.put_env(:my_app, :key, :value)
    assert Application.get_env(:my_app, :key) == :value
  end
end
```

**Why:** Async tests run in parallel. Global state mutations in parallel tests produce race conditions — intermittent failures that are nightmares to debug.

---

## 2. Parameterized Tests

**Source:** [lib/elixir/test/elixir/registry_test.exs#L12](https://github.com/elixir-lang/elixir/blob/f4e1b34617ef92052b65781f18eae5b88a490098/lib/elixir/test/elixir/registry_test.exs#L12)

**What it does:** Runs the same test suite against multiple configurations using the `:parameterize` option (since v1.18).

**Why:** Avoids duplicating test modules for combinatorial configurations. The Registry needs testing with `:unique`/`:duplicate` keys and varying partition counts.

**Pattern:**
```elixir
defmodule Registry.Test do
  use ExUnit.Case,
    async: true,
    parameterize:
      for(
        keys <- [:unique, :duplicate, {:duplicate, :pid}, {:duplicate, :key}],
        partitions <- [1, 8],
        do: %{keys: keys, partitions: partitions}
      )

  setup config do
    name = :"#{config.test}_#{config.partitions}_#{inspect(config.keys)}"
    opts = [keys: config.keys, name: name, partitions: config.partitions]
    {:ok, _} = start_supervised({Registry, opts})
    %{registry: name}
  end

  test "clean up registry on process crash", %{registry: registry, partitions: partitions} do
    # Test body uses parameters from context
  end
end
```

**Warning from docs:** "If you use parameterized tests and then find yourself adding conditionals in your tests to deal with different parameters, then parameterized tests may be the wrong solution."

### When to Use

**Triggers:**
- The same logic must work across multiple configurations (backends, modes, partition counts)
- You'd otherwise copy-paste an entire test module with minor variations
- The behavior under test is identical regardless of parameter — only setup differs

**Example — before:**
```elixir
# Two nearly identical modules
defmodule CacheEtsTest do
  use ExUnit.Case, async: true
  setup do: %{cache: start_cache(:ets)}
  test "get/set", %{cache: c}, do: # ...
end

defmodule CacheRedisTest do
  use ExUnit.Case, async: true
  setup do: %{cache: start_cache(:redis)}
  test "get/set", %{cache: c}, do: # ...  # Same test!
end
```

**Example — after:**
```elixir
defmodule CacheTest do
  use ExUnit.Case,
    async: true,
    parameterize: [%{backend: :ets}, %{backend: :redis}]

  setup %{backend: backend} do
    %{cache: start_cache(backend)}
  end

  test "get/set", %{cache: c} do
    # Runs once per backend — no duplication
  end
end
```

### When NOT to Use

**Don't use this when:**
- Different parameters need different assertions (sign you're testing different behavior)
- You find yourself adding `if config.backend == :redis` inside tests
- There are only 2 simple variations (just write two tests with descriptive names)

**Over-application example:**
```elixir
defmodule ApiTest do
  use ExUnit.Case,
    parameterize: [%{method: :get}, %{method: :post}]

  test "request", %{method: method} do
    if method == :get do
      assert get("/users") == 200
    else
      assert post("/users", %{name: "x"}) == 201  # Different assertion!
    end
  end
end
```

**Better alternative:**
```elixir
test "GET /users returns 200" do
  assert get("/users") == 200
end

test "POST /users creates a user" do
  assert post("/users", %{name: "x"}) == 201
end
```

**Why:** Parameterized tests assert the *same* behavior across configurations. If the assertions diverge per parameter, you're testing different things — write separate tests with clear names.

---

## 3. Setup with `start_supervised/2`

**Source:** [lib/ex_unit/lib/ex_unit/callbacks.ex#L277](https://github.com/elixir-lang/elixir/blob/f4e1b34617ef92052b65781f18eae5b88a490098/lib/ex_unit/lib/ex_unit/callbacks.ex#L277), [lib/elixir/test/elixir/registry_test.exs#L31](https://github.com/elixir-lang/elixir/blob/f4e1b34617ef92052b65781f18eae5b88a490098/lib/elixir/test/elixir/registry_test.exs#L31)

**What it does:** Starts processes under a test supervisor that guarantees cleanup before the next test.

**Why:** Eliminates manual cleanup. The test supervisor terminates children in reverse order before `on_exit` callbacks run. No leaked processes between tests.

**Pattern:**
```elixir
setup config do
  {:ok, _} = start_supervised({Registry, keys: :unique, name: config.test})
  %{registry: config.test}
end
```

**Contrast with anti-pattern:**
```elixir
# BAD — process may leak if test crashes before cleanup
setup do
  {:ok, pid} = Registry.start_link(keys: :unique, name: :my_reg)
  on_exit(fn -> Process.exit(pid, :kill) end)
  %{registry: :my_reg}
end
```

### When to Use

**Triggers:**
- Your test needs a running process (GenServer, Registry, Supervisor, etc.)
- You want guaranteed cleanup even if the test crashes
- The process should have the same lifecycle as the test

**Example — before:**
```elixir
setup do
  {:ok, pid} = MyServer.start_link(name: :test_server)
  on_exit(fn ->
    if Process.alive?(pid), do: GenServer.stop(pid)
  end)
  %{server: pid}
end
```

**Example — after:**
```elixir
setup do
  pid = start_supervised!(MyServer)
  %{server: pid}
end
```

### When NOT to Use

**Don't use this when:**
- You're testing the startup/shutdown behavior itself (need raw `start_link`)
- The process must outlive the test (rare — usually a test design smell)
- You need to test what happens when start_link fails

**Over-application example:**
```elixir
# Testing that start_link fails with bad args
test "rejects invalid config" do
  # start_supervised! will raise, hiding the actual error you want to test
  assert {:error, _} = start_supervised({MyServer, invalid: true})
end
```

**Better alternative:**
```elixir
test "rejects invalid config" do
  assert {:error, {:bad_config, _}} = MyServer.start_link(invalid: true)
end
```

**Why:** `start_supervised` is for processes your test *needs running*. When you're testing failure modes of the process itself, call `start_link` directly so you can assert on the error tuple.

---

## 4. Named Setup Functions (Composable Pipelines)

**Source:** [lib/ex_unit/lib/ex_unit/callbacks.ex#L100](https://github.com/elixir-lang/elixir/blob/f4e1b34617ef92052b65781f18eae5b88a490098/lib/ex_unit/lib/ex_unit/callbacks.ex#L100) (docs)

**What it does:** Defines setup as a list of named functions rather than anonymous blocks.

**Why:** Each step is independently testable, reusable, and the setup pipeline reads like a declaration of preconditions.

**Pattern:**
```elixir
setup [:clean_up_tmp_directory, :start_server, :seed_data]

defp clean_up_tmp_directory(_context), do: [tmp_dir: "/tmp/test"]
defp start_server(context), do: {:ok, server: start_supervised!({MyServer, context.tmp_dir})}
defp seed_data(context), do: :ok
```

### When to Use

**Triggers:**
- Setup has multiple independent steps that read better as named operations
- Different `describe` blocks need different combinations of setup steps
- You want to reuse individual setup steps across describe blocks

**Example — before:**
```elixir
setup do
  # 30 lines of mixed concerns in one block
  {:ok, _} = start_supervised(Database)
  user = insert(:user)
  token = generate_token(user)
  {:ok, socket} = connect(token)
  %{user: user, socket: socket, token: token}
end
```

**Example — after:**
```elixir
setup [:start_database, :create_user, :connect_socket]

defp start_database(_ctx), do: {:ok, db: start_supervised!(Database)}
defp create_user(_ctx), do: {:ok, user: insert(:user)}
defp connect_socket(%{user: user}), do: {:ok, socket: connect!(generate_token(user))}
```

### When NOT to Use

**Don't use this when:**
- Setup is 1-3 lines (named function adds indirection without clarity)
- Steps are tightly coupled and can't be composed independently
- Only one describe block uses the setup (inline is simpler)

**Over-application example:**
```elixir
# Over-decomposing trivial setup
setup [:assign_name]

defp assign_name(_ctx), do: {:ok, name: "Alice"}
```

**Better alternative:**
```elixir
setup do
  %{name: "Alice"}
end
```

**Why:** Named setup functions shine when they compose independently and describe preconditions. For trivial assignments, the indirection makes the code harder to follow, not easier.

---

## 5. `on_exit` for Reversing Global Side Effects

**Source:** [lib/elixir/test/elixir/task_test.exs#L1128](https://github.com/elixir-lang/elixir/blob/f4e1b34617ef92052b65781f18eae5b88a490098/lib/elixir/test/elixir/task_test.exs#L1128), [lib/logger/test/logger_test.exs#L12](https://github.com/elixir-lang/elixir/blob/f4e1b34617ef92052b65781f18eae5b88a490098/lib/logger/test/logger_test.exs#L12)

**What it does:** Registers cleanup callbacks that always run, even if the test fails.

**Why:** Guarantees global state (Logger config, ETS tables, process registrations) is restored regardless of test outcome.

**Pattern:**
```elixir
setup do
  translator = :logger.get_primary_config().filters[:logger_translator]
  assert :ok = :logger.remove_primary_filter(:logger_translator)
  on_exit(fn -> :logger.add_primary_filter(:logger_translator, translator) end)
end
```

**Key design:** `on_exit` runs in a *separate process* from the test, so it cannot interfere with test assertions.

### When to Use

**Triggers:**
- Your test modifies global state (application config, Logger, ETS, registered names)
- State must be restored even if the test crashes or fails
- You need cleanup that runs after the test process dies

**Example — before:**
```elixir
test "custom log level" do
  Logger.configure(level: :error)
  # test logic...
  Logger.configure(level: :debug)  # Never runs if test fails!
end
```

**Example — after:**
```elixir
test "custom log level" do
  original = Logger.level()
  on_exit(fn -> Logger.configure(level: original) end)
  Logger.configure(level: :error)
  # test logic — cleanup guaranteed
end
```

### When NOT to Use

**Don't use this when:**
- `start_supervised` handles the lifecycle (it cleans up automatically)
- The state is test-local (process dictionary, local variables)
- You're using it for process cleanup that `start_supervised` does better

**Over-application example:**
```elixir
setup do
  {:ok, pid} = MyWorker.start_link()
  on_exit(fn -> Process.exit(pid, :kill) end)
  %{worker: pid}
end
```

**Better alternative:**
```elixir
setup do
  pid = start_supervised!(MyWorker)
  %{worker: pid}
end
```

**Why:** `on_exit` is for *global* side effects that `start_supervised` can't handle. For process lifecycle, `start_supervised` is more robust — it handles ordering, linking, and shutdown properly.

---

## 6. Pattern Match Assertions

**Source:** [lib/ex_unit/lib/ex_unit/assertions.ex#L145](https://github.com/elixir-lang/elixir/blob/f4e1b34617ef92052b65781f18eae5b88a490098/lib/ex_unit/lib/ex_unit/assertions.ex#L145)

**What it does:** Uses `assert` with `=` for structural pattern matching in assertions.

**Why:** Provides rich failure messages showing both sides. More expressive than `assert x == y` when you only care about shape.

**Pattern:**
```elixir
# Assert structure, ignore specifics
assert {:ok, %{id: id}} = create_user("alice")
assert is_integer(id)

# Pin variables in patterns
x = 5
assert {:count, ^x} = get_counter()

# match? for complex guards
assert match?([%{id: id} | _] when is_integer(id), records)
```

### When to Use

**Triggers:**
- You care about the shape/structure but not every field
- You want to bind a value from the result for further assertions
- The response has dynamic fields (IDs, timestamps) you can't predict

**Example — before:**
```elixir
result = create_user("alice")
assert elem(result, 0) == :ok
user = elem(result, 1)
assert Map.has_key?(user, :id)
assert is_integer(user.id)
```

**Example — after:**
```elixir
assert {:ok, %{id: id}} = create_user("alice")
assert is_integer(id)
```

### When NOT to Use

**Don't use this when:**
- You need to assert exact equality (use `==`)
- The pattern is so loose it would match unintended values
- You're asserting on a boolean or simple scalar

**Over-application example:**
```elixir
# Pattern match that matches too broadly
assert {:ok, _} = dangerous_operation()
# This passes for {:ok, nil}, {:ok, :error_actually}, anything!
```

**Better alternative:**
```elixir
assert {:ok, %User{active: true}} = dangerous_operation()
# Or when you need exact value:
assert create_user("alice") == {:ok, %User{name: "alice", active: true}}
```

**Why:** Pattern match assertions are for structural validation. If your pattern is so loose it can't distinguish success from unexpected values, you're not actually testing anything meaningful.

---

## 7. `assert_receive` / `refute_receive` for Process Communication

**Source:** [lib/ex_unit/lib/ex_unit/assertions.ex#L466](https://github.com/elixir-lang/elixir/blob/f4e1b34617ef92052b65781f18eae5b88a490098/lib/ex_unit/lib/ex_unit/assertions.ex#L466), [lib/elixir/test/elixir/process_test.exs#L90](https://github.com/elixir-lang/elixir/blob/f4e1b34617ef92052b65781f18eae5b88a490098/lib/elixir/test/elixir/process_test.exs#L90)

**What it does:** Waits for messages matching a pattern within a timeout (default 100ms).

**Why:** Tests asynchronous process communication without `Process.sleep`. The test either receives the expected message or fails with a helpful mailbox dump.

**Pattern:**
```elixir
# Basic message assertion
test "send_after/3 sends messages once expired" do
  Process.send_after(self(), :hello, 10)
  assert_receive :hello
end

# Pattern matching with pins
test "monitor/2 with monitor options" do
  ref_and_alias = Process.monitor(pid, alias: :explicit_unalias)
  send(pid, {:ping, ref_and_alias})
  assert_receive :pong
  assert_receive {:DOWN, ^ref_and_alias, _, _, _}
end

# Negative assertion
test "exit(pid, :normal) does not cause the target process to exit" do
  Process.exit(pid, :normal)
  refute_receive {:EXIT, ^pid, :normal}, 100
end
```

### When to Use

**Triggers:**
- Testing async process communication (messages, monitors, links)
- You need to verify a message was sent without blocking indefinitely
- Testing pub/sub, GenServer casts, or event broadcasts

**Example — before:**
```elixir
test "notifies subscriber" do
  subscribe(self(), :topic)
  publish(:topic, "hello")
  Process.sleep(100)  # Hope it arrived...
  assert_received {:topic, "hello"}  # assert_received checks mailbox NOW
end
```

**Example — after:**
```elixir
test "notifies subscriber" do
  subscribe(self(), :topic)
  publish(:topic, "hello")
  assert_receive {:topic, "hello"}, 500  # Waits UP TO 500ms
end
```

### When NOT to Use

**Don't use this when:**
- The operation is synchronous (use regular `assert` with the return value)
- You're testing a GenServer.call (it already returns the result synchronously)
- The default 100ms timeout would make tests flaky — consider a longer timeout or redesigning

**Over-application example:**
```elixir
# Using assert_receive for a synchronous operation
test "get user" do
  send(self(), {:user, get_user(1)})  # Why send to self?
  assert_receive {:user, %User{id: 1}}
end
```

**Better alternative:**
```elixir
test "get user" do
  assert %User{id: 1} = get_user(1)
end
```

**Why:** `assert_receive` is for genuinely async communication — messages that arrive independently of the test's control flow. For synchronous return values, just assert on the return directly.

---

## 8. Testing GenServers via Public API (No Internal State Inspection)

**Source:** [lib/elixir/test/elixir/gen_server_test.exs#L87](https://github.com/elixir-lang/elixir/blob/f4e1b34617ef92052b65781f18eae5b88a490098/lib/elixir/test/elixir/gen_server_test.exs#L87)

**What it does:** Tests GenServer behavior exclusively through `GenServer.call/cast/stop` — never peeks at internal state.

**Why:** Tests the contract, not the implementation. Internal state changes don't break tests.

**Pattern:**
```elixir
test "start_link/2, call/2 and cast/2" do
  {:ok, pid} = GenServer.start_link(Stack, [:hello])

  assert GenServer.call(pid, :pop) == :hello
  assert GenServer.cast(pid, {:push, :world}) == :ok
  assert GenServer.call(pid, :pop) == :world
  assert GenServer.stop(pid) == :ok
end
```

### When to Use

**Triggers:**
- Testing any GenServer, Agent, or stateful process
- You want tests that survive internal refactoring
- The process has a well-defined public API

**Example — before:**
```elixir
test "push adds to stack" do
  {:ok, pid} = Stack.start_link([:hello])
  GenServer.cast(pid, {:push, :world})
  # Peeking at internal state — couples test to implementation
  assert :sys.get_state(pid) == [:world, :hello]
end
```

**Example — after:**
```elixir
test "push adds to stack" do
  {:ok, pid} = Stack.start_link([:hello])
  GenServer.cast(pid, {:push, :world})
  assert GenServer.call(pid, :pop) == :world
  assert GenServer.call(pid, :pop) == :hello
end
```

### When NOT to Use

**Don't use this when:**
- You're debugging a specific state corruption bug (temporarily peek, then fix)
- The process has no public query API and adding one just for tests would bloat the interface
- You're testing internal state transitions explicitly (state machine verification)

**Over-application example:**
```elixir
# Avoiding state inspection when there's no query API
test "handles concurrent updates" do
  cast(pid, {:increment, 5})
  cast(pid, {:increment, 3})
  # No way to observe the result without :sys.get_state or adding a query call
  Process.sleep(100)
  # ...can't assert anything useful
end
```

**Better alternative:**
```elixir
# Add a minimal query function to the public API
test "handles concurrent updates" do
  cast(pid, {:increment, 5})
  cast(pid, {:increment, 3})
  assert call(pid, :get_count) == 8
end
```

**Why:** The principle is "test through the API," not "never observe state." If your process lacks observability, add a read function — that's a better public API, not just a test convenience.

---

## 9. `catch_exit` for Testing Process Failures

**Source:** [lib/ex_unit/lib/ex_unit/assertions.ex#L950](https://github.com/elixir-lang/elixir/blob/f4e1b34617ef92052b65781f18eae5b88a490098/lib/ex_unit/lib/ex_unit/assertions.ex#L950), [lib/elixir/test/elixir/gen_server_test.exs#L118](https://github.com/elixir-lang/elixir/blob/f4e1b34617ef92052b65781f18eae5b88a490098/lib/elixir/test/elixir/gen_server_test.exs#L118)

**What it does:** Catches exit signals from linked processes for assertion, or uses `Process.flag(:trap_exit, true)` + `assert_receive {:EXIT, ...}`.

**Why:** Testing error conditions in OTP requires intercepting exit signals. The two approaches serve different needs.

**Pattern:**
```elixir
# catch_exit for synchronous exit testing
test "call/3 exit messages" do
  assert catch_exit(GenServer.call(pid, :noreply, 1)) ==
           {:timeout, {GenServer, :call, [pid, :noreply, 1]}}
end

# trap_exit for linked process exits
test "exits on task error" do
  Process.flag(:trap_exit, true)
  task = Task.async(fn -> raise "oops" end)
  assert {{%RuntimeError{}, _}, {Task, :await, [^task, 5000]}} = catch_exit(Task.await(task))
end
```

### When to Use

**Triggers:**
- Testing that a GenServer call times out or exits with a specific reason
- Testing that linked processes propagate exit signals correctly
- Verifying OTP shutdown behavior and exit reasons

**Example — before:**
```elixir
test "times out" do
  # Just assert it raises... but exit != raise
  assert_raise RuntimeError, fn ->
    GenServer.call(pid, :slow, 1)
  end
  # This fails! Exits aren't raises.
end
```

**Example — after:**
```elixir
test "times out" do
  assert catch_exit(GenServer.call(pid, :slow, 1)) ==
    {:timeout, {GenServer, :call, [pid, :slow, 1]}}
end
```

### When NOT to Use

**Don't use this when:**
- The function raises an exception (use `assert_raise` instead)
- You can test the error through the public API's return value `{:error, reason}`
- The exit is a side effect you don't care about (just test the observable behavior)

**Over-application example:**
```elixir
# Using catch_exit when the API already returns error tuples
test "handles missing key" do
  assert catch_exit(GenServer.call(pid, {:get, :missing}))
  # The server actually returns {:error, :not_found} — no exit!
end
```

**Better alternative:**
```elixir
test "handles missing key" do
  assert GenServer.call(pid, {:get, :missing}) == {:error, :not_found}
end
```

**Why:** `catch_exit` is specifically for OTP exit signals (`:timeout`, `:noproc`, `:normal`, `{:shutdown, reason}`). If the function returns error tuples rather than exiting, assert on the return value directly.

---

## 10. `@tag capture_log: true` for Suppressing Expected Log Output

**Source:** [lib/elixir/test/elixir/gen_server_test.exs#L114](https://github.com/elixir-lang/elixir/blob/f4e1b34617ef92052b65781f18eae5b88a490098/lib/elixir/test/elixir/gen_server_test.exs#L114), [lib/elixir/test/elixir/task_test.exs#L10](https://github.com/elixir-lang/elixir/blob/f4e1b34617ef92052b65781f18eae5b88a490098/lib/elixir/test/elixir/task_test.exs#L10)

**What it does:** Captures log output during the test, only printing it if the test fails.

**Why:** Tests that intentionally trigger error conditions produce noisy log output. Capturing keeps the test output clean while preserving diagnostics on failure.

**Pattern:**
```elixir
# Per-test tag
@tag capture_log: true
test "call/3 exit messages" do
  # This test triggers error logs — they're captured
end

# Module-level for all tests
@moduletag :capture_log
```

### When to Use

**Triggers:**
- Tests intentionally trigger error paths that log warnings/errors
- Test output is noisy with expected error messages
- You want clean `mix test` output but need logs preserved for debugging failures

**Example — before:**
```elixir
test "handles crash" do
  # Passes, but test output shows:
  # [error] GenServer #PID<0.123.0> terminating
  # [error] ** (RuntimeError) intentional crash
  crash_worker(pid)
  assert_receive {:restarted, _}
end
```

**Example — after:**
```elixir
@tag capture_log: true
test "handles crash" do
  crash_worker(pid)
  assert_receive {:restarted, _}
  # Logs captured — only shown if this test FAILS
end
```

### When NOT to Use

**Don't use this when:**
- You want to assert on log content (use `capture_log/2` function instead)
- The logs indicate a real problem you should fix, not expected behavior
- You're hiding logs to mask flaky tests

**Over-application example:**
```elixir
@moduletag :capture_log  # Blanket capture on entire module

test "creates user" do
  # This test logs "[warn] duplicate email check" — is that expected?
  # By capturing everything, you might miss real warnings
  assert {:ok, _} = create_user(attrs)
end
```

**Better alternative:**
```elixir
# Only capture on tests that INTENTIONALLY trigger errors
test "creates user" do
  assert {:ok, _} = create_user(attrs)
  # If there's a warning, investigate it — don't hide it
end

@tag capture_log: true
test "rejects duplicate email" do
  create_user(attrs)
  assert {:error, :duplicate} = create_user(attrs)
  # Expected warning about duplicate — captured
end
```

**Why:** Blanket log capture hides signals. Apply `capture_log` surgically to tests where you *expect* error output. Unexpected logs in other tests might reveal bugs.

---

## 11. `capture_log` / `capture_io` for Content Assertions

**Source:** [lib/ex_unit/lib/ex_unit/capture_log.ex#L1](https://github.com/elixir-lang/elixir/blob/f4e1b34617ef92052b65781f18eae5b88a490098/lib/ex_unit/lib/ex_unit/capture_log.ex#L1), [lib/elixir/test/elixir/task_test.exs#L1138](https://github.com/elixir-lang/elixir/blob/f4e1b34617ef92052b65781f18eae5b88a490098/lib/elixir/test/elixir/task_test.exs#L1138)

**What it does:** Captures log/IO output and returns it as a string for assertion.

**Why:** Tests that the right messages are logged/printed without relying on side effects.

**Pattern:**
```elixir
# capture_log for asserting log content
test "logs a terminated task" do
  assert ExUnit.CaptureLog.capture_log(fn ->
           ref = Process.monitor(pid)
           send(pid, :go)
           receive do: ({:DOWN, ^ref, _, _, _} -> :ok)
         end) =~ ~r/Task .* terminating/
end

# with_io returns both result and output (since v1.13)
{result, output} = with_io(fn ->
  IO.puts("a")
  2 + 2
end)
assert result == 4
assert output == "a\n"
```

**Important for async tests:** Use `=~` instead of `==` for `:stderr` captures because output from other tests may interleave.

### When to Use

**Triggers:**
- You need to verify specific log messages are emitted
- Testing CLI output or formatted display
- Verifying error messages are user-friendly

**Example — before:**
```elixir
test "logs warning on retry" do
  # Just call it and... hope the log is right?
  retry_request(url)
  # No assertion on the log content
end
```

**Example — after:**
```elixir
test "logs warning on retry" do
  log = capture_log(fn -> retry_request(url) end)
  assert log =~ "retrying request"
  assert log =~ url
end
```

### When NOT to Use

**Don't use this when:**
- You just want to suppress noisy logs (use `@tag capture_log: true`)
- The log message is an implementation detail that shouldn't be part of the contract
- Testing the behavior is sufficient — the log is incidental

**Over-application example:**
```elixir
test "creates user" do
  log = capture_log(fn ->
    assert {:ok, user} = create_user(attrs)
  end)
  assert log =~ "INSERT INTO users"  # Testing SQL logs?! Fragile.
end
```

**Better alternative:**
```elixir
test "creates user" do
  assert {:ok, user} = create_user(attrs)
  assert user.name == "Alice"
  # SQL logs are an implementation detail — don't assert on them
end
```

**Why:** Assert on logs that are *part of the contract* (user-facing warnings, audit trail). Don't assert on incidental logs that change with implementation — they make tests brittle.

---

## 12. `describe` Blocks for Logical Grouping

**Source:** `lib/elixir/test/elixir/task_test.exs:218,272,365`, [lib/elixir/test/elixir/process_test.exs#L146](https://github.com/elixir-lang/elixir/blob/f4e1b34617ef92052b65781f18eae5b88a490098/lib/elixir/test/elixir/process_test.exs#L146)

**What it does:** Groups related tests under a named describe block. Setup inside describe only applies to that group.

**Why:** Organizes tests by function/feature. Makes test output readable. Allows scoped `@describetag` and scoped setup.

**Pattern:**
```elixir
describe "await/2" do
  test "exits on timeout" do
    task = %Task{ref: make_ref(), owner: self(), pid: nil, mfa: {__MODULE__, :test, 1}}
    assert catch_exit(Task.await(task, 0)) == {:timeout, {Task, :await, [task, 0]}}
  end

  test "exits on normal exit" do
    task = Task.async(fn -> exit(:normal) end)
    assert catch_exit(Task.await(task)) == {:normal, {Task, :await, [task, 5000]}}
  end
end
```

**Constraint:** Describe blocks cannot be nested. `setup_all` cannot appear inside describe.

### When to Use

**Triggers:**
- A module tests multiple public functions
- Tests share setup that's specific to one function/feature
- You want test output organized by feature (e.g., "describe await/2 — exits on timeout")

**Example — before:**
```elixir
test "push adds element" do ... end
test "push returns :ok" do ... end
test "pop returns top element" do ... end
test "pop from empty raises" do ... end
# Flat list — hard to see which tests cover which function
```

**Example — after:**
```elixir
describe "push/2" do
  test "adds element to the top" do ... end
  test "returns :ok" do ... end
end

describe "pop/1" do
  test "returns top element" do ... end
  test "raises on empty stack" do ... end
end
```

### When NOT to Use

**Don't use this when:**
- The module tests one function (describe adds an unnecessary nesting level)
- You'd have a describe block with a single test in it
- You need nested grouping (describe can't nest — use separate modules)

**Over-application example:**
```elixir
describe "parse/1" do
  test "parses input" do
    assert parse("hello") == {:ok, "hello"}
  end
end
# One test in a describe — just use a standalone test
```

**Better alternative:**
```elixir
test "parse/1 parses input" do
  assert parse("hello") == {:ok, "hello"}
end
```

**Why:** `describe` provides structure when there are multiple tests per feature. A single test in a describe is over-organization — the describe name adds visual noise without grouping benefit.

---

## 13. `ExUnit.CaseTemplate` for Shared Test Infrastructure

**Source:** [lib/mix/test/test_helper.exs#L79](https://github.com/elixir-lang/elixir/blob/f4e1b34617ef92052b65781f18eae5b88a490098/lib/mix/test/test_helper.exs#L79), [lib/logger/test/test_helper.exs#L24](https://github.com/elixir-lang/elixir/blob/f4e1b34617ef92052b65781f18eae5b88a490098/lib/logger/test/test_helper.exs#L24)

**What it does:** Defines reusable test case templates with shared setup, helpers, and imports.

**Why:** Eliminates duplication across test modules. Provides domain-specific test DSLs.

**Pattern:**
```elixir
# In test_helper.exs
defmodule Logger.Case do
  use ExUnit.CaseTemplate

  using _ do
    quote do
      import Logger.Case
    end
  end

  setup do
    on_exit(fn ->
      # Shared cleanup for all tests using this template
    end)
    :ok
  end

  def capture_log(level \\ :debug, fun) do
    Logger.configure(level: level)
    capture_io(:user, fn ->
      fun.()
      Logger.flush()
    end)
  after
    Logger.configure(level: :debug)
  end
end

# In test file:
defmodule LoggerTest do
  use Logger.Case
  # Gets all imports and setup from the template
end
```

### When to Use

**Triggers:**
- Multiple test modules share the same setup/teardown logic
- You're building a test DSL (e.g., `DataCase` for database tests in Phoenix)
- Shared helpers need to be imported into every test module of a certain type

**Example — before:**
```elixir
# Repeated in every test module that uses the database
defmodule UsersTest do
  use ExUnit.Case
  setup do
    :ok = Ecto.Adapters.SQL.Sandbox.checkout(Repo)
    Ecto.Adapters.SQL.Sandbox.mode(Repo, {:shared, self()})
  end
end

defmodule PostsTest do
  use ExUnit.Case
  setup do
    :ok = Ecto.Adapters.SQL.Sandbox.checkout(Repo)  # Same thing again
    Ecto.Adapters.SQL.Sandbox.mode(Repo, {:shared, self()})
  end
end
```

**Example — after:**
```elixir
defmodule MyApp.DataCase do
  use ExUnit.CaseTemplate

  setup do
    :ok = Ecto.Adapters.SQL.Sandbox.checkout(Repo)
    Ecto.Adapters.SQL.Sandbox.mode(Repo, {:shared, self()})
  end
end

defmodule UsersTest do
  use MyApp.DataCase  # All DB setup handled
end
```

### When NOT to Use

**Don't use this when:**
- Only one or two test modules share the setup (just use named setup functions)
- The template would have many options making it hard to understand what's actually set up
- You're hiding important test context behind abstraction

**Over-application example:**
```elixir
defmodule MyApp.SuperCase do
  use ExUnit.CaseTemplate
  using do
    quote do
      import MyApp.Factory
      import MyApp.Assertions
      import MyApp.Helpers
      alias MyApp.{Repo, User, Post, Comment, Tag}
      # 20 more aliases...
    end
  end
  # Every test gets everything whether it needs it or not
end
```

**Better alternative:**
```elixir
# Focused templates for specific test types
defmodule MyApp.DataCase do ... end    # Database tests
defmodule MyApp.ConnCase do ... end    # HTTP tests
defmodule MyApp.ChannelCase do ... end # WebSocket tests
```

**Why:** A "god template" that imports everything creates implicit dependencies and makes it impossible to know what a test actually needs. Use focused templates that match distinct test categories.

---

## 14. `doctest` Integration

**Source:** [lib/ex_unit/lib/ex_unit/doc_test.ex#L1](https://github.com/elixir-lang/elixir/blob/f4e1b34617ef92052b65781f18eae5b88a490098/lib/ex_unit/lib/ex_unit/doc_test.ex#L1), [lib/elixir/test/elixir/agent_test.exs#L9](https://github.com/elixir-lang/elixir/blob/f4e1b34617ef92052b65781f18eae5b88a490098/lib/elixir/test/elixir/agent_test.exs#L9)

**What it does:** Generates tests from `@doc` and `@moduledoc` code examples.

**Why:** Documentation examples are always verified. Prevents docs from rotting.

**Pattern:**
```elixir
defmodule AgentTest do
  use ExUnit.Case, async: true
  doctest Agent
end

# Selective doctesting:
doctest Kernel, except: [===: 2, !==: 2, and: 2, or: 2]
```

### When to Use

**Triggers:**
- Your module has `iex>` examples in `@doc` or `@moduledoc`
- You want to ensure documentation examples stay correct across refactors
- The function has simple, deterministic input/output that's easy to show in docs

**Example — before:**
```elixir
@doc """
Doubles a number.

    iex> double(5)
    10
"""
def double(n), do: n * 2
# No doctest — this example might rot if you rename the function
```

**Example — after:**
```elixir
# In test file:
defmodule MathTest do
  use ExUnit.Case, async: true
  doctest MyApp.Math
  # Now the iex> example is verified on every test run
end
```

### When NOT to Use

**Don't use this when:**
- Examples require complex setup (database, processes, external state)
- Output is non-deterministic (timestamps, random values, PIDs)
- The function's behavior is better tested with dedicated unit tests

**Over-application example:**
```elixir
@doc """
Creates a user.

    iex> {:ok, user} = create_user(%{name: "Alice"})
    iex> user.id
    1
"""
# User ID is auto-incremented — this breaks on second run!
```

**Better alternative:**
```elixir
@doc """
Creates a user.

    {:ok, user} = MyApp.create_user(%{name: "Alice"})
    user.name
    #=> "Alice"

"""
# Don't use iex> prefix — this is illustrative, not a doctest
# Test the actual behavior in a proper test with DB setup
```

**Why:** Doctests are for deterministic, setup-free examples. If the example needs a database, process, or produces non-deterministic output, write a proper test — doctests can't handle setup/teardown.

---

## 15. `Process.sleep(:infinity)` as a Process Parking Pattern

**Source:** [lib/elixir/test/elixir/task_test.exs#L417](https://github.com/elixir-lang/elixir/blob/f4e1b34617ef92052b65781f18eae5b88a490098/lib/elixir/test/elixir/task_test.exs#L417), [lib/elixir/test/elixir/registry_test.exs#L71](https://github.com/elixir-lang/elixir/blob/f4e1b34617ef92052b65781f18eae5b88a490098/lib/elixir/test/elixir/registry_test.exs#L71)

**What it does:** Spawns processes that block forever, used as test subjects that need to exist until explicitly killed.

**Why:** Creates stable process references for testing supervision, monitoring, and registry behavior. The process stays alive until the test supervisor shuts it down.

**Pattern:**
```elixir
# Process exists solely to be registered/monitored
{:ok, task} =
  Task.start(fn ->
    send(parent, Registry.register(registry, key, value))
    Process.sleep(:infinity)
  end)

# Then kill it to test cleanup:
Process.exit(task, :kill)
assert_receive {:DOWN, ^ref, _, _, _}
```

**Important distinction:** This is NOT `Process.sleep(100)` for timing — it's an intentional "park this process" pattern where the process is always explicitly terminated by the test.

### When to Use

**Triggers:**
- You need a process that exists as a test subject (for monitoring, registry, supervision tests)
- The process doesn't need to do anything — just exist and be killable
- Testing cleanup/shutdown behavior when a process dies

**Example — before:**
```elixir
test "monitors processes" do
  pid = spawn(fn ->
    receive do: (:stop -> :ok)  # Must send :stop to clean up
  end)
  ref = Process.monitor(pid)
  send(pid, :stop)
  assert_receive {:DOWN, ^ref, _, _, :normal}
end
```

**Example — after:**
```elixir
test "monitors processes" do
  pid = spawn(fn -> Process.sleep(:infinity) end)
  ref = Process.monitor(pid)
  Process.exit(pid, :kill)
  assert_receive {:DOWN, ^ref, _, _, :killed}
end
```

### When NOT to Use

**Don't use this when:**
- You need the process to actually do something (send messages, handle calls)
- You're using it as a timing mechanism (`Process.sleep(100)` for "wait a bit")
- The process should be managed by `start_supervised` (which handles cleanup)

**Over-application example:**
```elixir
test "worker processes requests" do
  pid = spawn(fn ->
    Process.sleep(:infinity)  # But the test needs it to handle messages!
  end)
  send(pid, {:process, data})
  assert_receive {:result, _}  # Never arrives — process is sleeping!
end
```

**Better alternative:**
```elixir
test "worker processes requests" do
  pid = spawn(fn ->
    receive do
      {:process, data} -> send(parent, {:result, transform(data)})
    end
  end)
  send(pid, {:process, data})
  assert_receive {:result, _}
end
```

**Why:** `Process.sleep(:infinity)` is for *inert* test subjects — processes that exist to be observed, not to perform work. If the test needs the process to respond, it needs a receive loop, not a sleep.

---

## 16. Helper Functions for Test-Specific Behavior

**Source:** [lib/elixir/test/elixir/task_test.exs#L12](https://github.com/elixir-lang/elixir/blob/f4e1b34617ef92052b65781f18eae5b88a490098/lib/elixir/test/elixir/task_test.exs#L12), [lib/elixir/test/elixir/supervisor_test.exs#L278](https://github.com/elixir-lang/elixir/blob/f4e1b34617ef92052b65781f18eae5b88a490098/lib/elixir/test/elixir/supervisor_test.exs#L278)

**What it does:** Defines private helper functions within test modules for common test operations.

**Why:** Keeps tests DRY without over-abstracting. Helpers like `wait_until_down`, `assert_kill`, `create_dummy_task` encapsulate recurring patterns.

**Pattern:**
```elixir
defmodule TaskTest do
  use ExUnit.Case

  # Helper to create a known-state task for testing edge cases
  defp create_dummy_task(reason) do
    {pid, ref} = spawn_monitor(Kernel, :exit, [reason])
    receive do
      {:DOWN, ^ref, _, _, _} ->
        %Task{ref: ref, pid: pid, owner: self(), mfa: {__MODULE__, :create_dummy_task, 1}}
    end
  end

  # Helper that properly waits for process termination
  def wait_until_down(task) do
    ref = Process.monitor(task.pid)
    assert_receive {:DOWN, ^ref, _, _, _}
  end

  # Helper for asserting process kill
  defp assert_kill(pid, reason) do
    ref = Process.monitor(pid)
    Process.exit(pid, reason)
    assert_receive {:DOWN, ^ref, _, _, _}
  end
end
```

### When to Use

**Triggers:**
- The same 3-5 line pattern repeats across multiple tests in the module
- The helper name makes tests more readable by expressing intent
- Setup logic is complex enough to obscure the test's actual assertion

**Example — before:**
```elixir
test "cleans up on crash 1" do
  ref = Process.monitor(pid1)
  Process.exit(pid1, :kill)
  assert_receive {:DOWN, ^ref, _, _, _}
  assert Registry.lookup(reg, :key) == []
end

test "cleans up on crash 2" do
  ref = Process.monitor(pid2)
  Process.exit(pid2, :kill)
  assert_receive {:DOWN, ^ref, _, _, _}  # Same 3 lines again
  assert Registry.lookup(reg, :key) == []
end
```

**Example — after:**
```elixir
defp kill_and_wait(pid) do
  ref = Process.monitor(pid)
  Process.exit(pid, :kill)
  assert_receive {:DOWN, ^ref, _, _, _}
end

test "cleans up on crash 1" do
  kill_and_wait(pid1)
  assert Registry.lookup(reg, :key) == []
end
```

### When NOT to Use

**Don't use this when:**
- The "helper" is used only once (inline it)
- The helper hides important test details that readers need to see
- Over-abstraction makes tests harder to understand in isolation

**Over-application example:**
```elixir
defp setup_and_assert(input, expected) do
  {:ok, pid} = start_supervised({Worker, input})
  result = Worker.process(pid)
  assert result == expected
end

test "processes integers", do: setup_and_assert(42, {:ok, 42})
test "processes strings", do: setup_and_assert("hi", {:ok, "hi"})
# Tests are now opaque — can't see what's actually being tested
```

**Better alternative:**
```elixir
test "processes integers" do
  pid = start_supervised!({Worker, 42})
  assert Worker.process(pid) == {:ok, 42}
end

test "processes strings" do
  pid = start_supervised!({Worker, "hi"})
  assert Worker.process(pid) == {:ok, "hi"}
end
```

**Why:** Test helpers should extract *mechanics* (kill-and-wait, setup-server), not *logic* (the actual behavior under test). If a helper contains assertions, readers can't understand the test without reading the helper.

---

## 17. `@tag :tmp_dir` for Filesystem Tests

**Source:** [lib/ex_unit/lib/ex_unit/case.ex#L281](https://github.com/elixir-lang/elixir/blob/f4e1b34617ef92052b65781f18eae5b88a490098/lib/ex_unit/lib/ex_unit/case.ex#L281), [lib/elixir/test/elixir/path_test.exs#L12](https://github.com/elixir-lang/elixir/blob/f4e1b34617ef92052b65781f18eae5b88a490098/lib/elixir/test/elixir/path_test.exs#L12)

**What it does:** ExUnit automatically creates a unique temporary directory and passes its path via the test context.

**Why:** Filesystem tests need isolation. Each test gets its own directory, removed before creation to ensure a clean slate.

**Pattern:**
```elixir
@tag :tmp_dir
test "writes files", %{tmp_dir: tmp_dir} do
  path = Path.join(tmp_dir, "test.txt")
  File.write!(path, "hello")
  assert File.read!(path) == "hello"
end
```

### When to Use

**Triggers:**
- Tests create, read, or modify files
- Multiple tests would conflict if they used the same paths
- You want filesystem tests to run with `async: true`

**Example — before:**
```elixir
test "writes config file" do
  path = "/tmp/test_config.json"
  File.write!(path, "{}")
  # Another async test writes to the same path — race condition!
  assert File.read!(path) == "{}"
end
```

**Example — after:**
```elixir
@tag :tmp_dir
test "writes config file", %{tmp_dir: dir} do
  path = Path.join(dir, "config.json")
  File.write!(path, "{}")
  assert File.read!(path) == "{}"
  # Unique directory per test — safe for async
end
```

### When NOT to Use

**Don't use this when:**
- Tests only read files (no isolation needed for read-only access)
- You're testing in-memory operations that happen to involve path strings
- The filesystem interaction is mocked/stubbed

**Over-application example:**
```elixir
@tag :tmp_dir
test "parses path components", %{tmp_dir: _dir} do
  # Doesn't actually touch the filesystem!
  assert Path.basename("/foo/bar/baz.txt") == "baz.txt"
end
```

**Better alternative:**
```elixir
test "parses path components" do
  assert Path.basename("/foo/bar/baz.txt") == "baz.txt"
end
```

**Why:** `@tag :tmp_dir` creates actual directories on disk — it's overhead. Only use it when the test genuinely needs filesystem isolation. Pure path manipulation doesn't touch the filesystem.

---

## 18. `assert_raise` with Message Matching

**Source:** [lib/ex_unit/lib/ex_unit/assertions.ex#L815](https://github.com/elixir-lang/elixir/blob/f4e1b34617ef92052b65781f18eae5b88a490098/lib/ex_unit/lib/ex_unit/assertions.ex#L815)

**What it does:** Asserts both the exception type AND the message content (string or regex).

**Why:** Verifying the exception type alone is insufficient — the message tells users what went wrong. Testing it ensures error UX.

**Pattern:**
```elixir
# Exact message match
assert_raise ArgumentError, ~r"expected :name option to be one of the following:", fn ->
  GenServer.start_link(Stack, [:hello], name: "my_gen_server_name")
end

# Regex for dynamic content
assert_raise RuntimeError, ~r/^today's lucky number is 0\.\d+!$/, fn ->
  raise "today's lucky number is #{:rand.uniform()}!"
end
```

### When to Use

**Triggers:**
- Testing error messages that users will see
- Validating that errors provide actionable information
- The error type alone isn't specific enough (many places raise `ArgumentError`)

**Example — before:**
```elixir
test "rejects bad input" do
  assert_raise ArgumentError, fn ->
    parse("not_a_number")
  end
  # Passes even if the message is wrong or unhelpful
end
```

**Example — after:**
```elixir
test "rejects bad input" do
  assert_raise ArgumentError, ~r/cannot parse .* as integer/, fn ->
    parse("not_a_number")
  end
  # Verifies the error message is helpful
end
```

### When NOT to Use

**Don't use this when:**
- The exact message text is an implementation detail that changes often
- You're testing a third-party library's error messages (they might change)
- The exception type alone is sufficient to distinguish the error case

**Over-application example:**
```elixir
test "file not found" do
  assert_raise File.Error, "could not read file \"/no/such/file\": no such file or directory", fn ->
    File.read!("/no/such/file")
  end
  # Exact message match breaks across OS versions / locales
end
```

**Better alternative:**
```elixir
test "file not found" do
  assert_raise File.Error, fn ->
    File.read!("/no/such/file")
  end
  # Or with regex for the stable part:
  assert_raise File.Error, ~r/could not read file/, fn ->
    File.read!("/no/such/file")
  end
end
```

**Why:** Match the *stable, meaningful* part of error messages. OS-specific paths, locale-dependent strings, and implementation details make exact matches brittle across environments.

---

## 19. `@moduletag` / `@describetag` for Cross-Cutting Configuration

**Source:** `lib/elixir/test/elixir/system_test.exs:104,163`, [lib/elixir/test/elixir/task_test.exs#L10](https://github.com/elixir-lang/elixir/blob/f4e1b34617ef92052b65781f18eae5b88a490098/lib/elixir/test/elixir/task_test.exs#L10)

**What it does:** Sets tags that apply to all tests in a module or describe block, used for filtering and configuration.

**Why:** Enables running subsets of tests (`mix test --include unix`) and applying configuration (like `:capture_log`) without repeating it on every test.

**Pattern:**
```elixir
defmodule SystemTest do
  use ExUnit.Case, async: true

  describe "Windows" do
    @describetag :windows
    # All tests here tagged :windows
  end

  describe "Unix" do
    @describetag :unix
    # All tests here tagged :unix
  end
end
```

### When to Use

**Triggers:**
- Tests only run on certain platforms (OS, architecture)
- You want to run a subset of tests via `--include` / `--exclude`
- A whole module or describe block shares configuration (capture_log, tmp_dir)

**Example — before:**
```elixir
# Manually skipping in each test
test "symlinks" do
  if :os.type() != {:unix, :linux}, do: ExUnit.skip("unix only")
  # ...
end

test "permissions" do
  if :os.type() != {:unix, :linux}, do: ExUnit.skip("unix only")
  # ...
end
```

**Example — after:**
```elixir
describe "Unix filesystem" do
  @describetag :unix

  test "symlinks" do ... end
  test "permissions" do ... end
end

# In test_helper.exs:
ExUnit.configure(exclude: [:unix], include: [])
# Run with: mix test --include unix
```

### When NOT to Use

**Don't use this when:**
- The tag applies to a single test (use `@tag` instead)
- You're using tags as a substitute for proper test organization
- The tag doesn't enable filtering or configuration — it's just metadata no one reads

**Over-application example:**
```elixir
@moduletag :unit
@moduletag :fast
@moduletag :users
@moduletag :important
# Tags no one filters on — just noise in the module header
```

**Better alternative:**
```elixir
# Only tag what you actually filter on
@moduletag :capture_log  # Used by ExUnit
# If you never run `--include unit`, don't tag it
```

**Why:** Tags have cost — they clutter the module header and create the illusion of organization. Only add tags that drive behavior (ExUnit configuration) or that you actually filter on in CI/development.

---

## 20. Context Pattern Matching in Test Signatures

**Source:** [lib/ex_unit/lib/ex_unit/case.ex#L57](https://github.com/elixir-lang/elixir/blob/f4e1b34617ef92052b65781f18eae5b88a490098/lib/ex_unit/lib/ex_unit/case.ex#L57), [lib/elixir/test/elixir/gen_server_test.exs#L166](https://github.com/elixir-lang/elixir/blob/f4e1b34617ef92052b65781f18eae5b88a490098/lib/elixir/test/elixir/gen_server_test.exs#L166)

**What it does:** Destructures the test context directly in the test function signature.

**Why:** Makes dependencies explicit. You see exactly what each test needs from setup.

**Pattern:**
```elixir
test "abcast/3", %{test: name} do
  {:ok, _} = GenServer.start_link(Stack, [], name: name)
  assert GenServer.abcast(name, {:push, :hello}) == :abcast
end

# Using test name for unique naming — prevents collision in async tests
```

The `%{test: name}` pattern is ubiquitous — the test name is unique per module, making it perfect for naming registered processes in async tests.

### When to Use

**Triggers:**
- Your test needs values from `setup` (server pids, registry names, tmp dirs)
- You want to make test dependencies visible in the test signature
- Using `%{test: name}` for unique process registration in async tests

**Example — before:**
```elixir
setup do
  {:ok, pid} = start_supervised(MyServer)
  %{server: pid, name: "test_user"}
end

test "queries server" do
  # Where does 'server' come from? Must read setup.
  server = ???
end
```

**Example — after:**
```elixir
setup do
  {:ok, pid} = start_supervised(MyServer)
  %{server: pid, name: "test_user"}
end

test "queries server", %{server: pid, name: name} do
  assert MyServer.get(pid, name) == :ok
end
```

### When NOT to Use

**Don't use this when:**
- The test doesn't use any setup context
- You're destructuring the entire context when you only need one field
- The test is standalone and self-contained

**Over-application example:**
```elixir
test "basic math", %{test: _test} do
  # Destructuring context for a test that doesn't need it
  assert 2 + 2 == 4
end
```

**Better alternative:**
```elixir
test "basic math" do
  assert 2 + 2 == 4
end
```

**Why:** Context destructuring signals "this test depends on external setup." If the test is self-contained, the pattern match is misleading — readers will look for setup that doesn't exist or isn't needed.

<!-- PATTERN_COMPLETE -->